Danh mục tiêu chuẩn ISO ban hàng tháng 7/2023:
ISO 20297-2:2023
Industrial trucks — Lorry-mounted trucks — Part 2: Safe use requirements
Pages: 15
ISO 20404:2023
Biotechnology — Bioprocessing — General requirements for the design of packaging to contain cells for therapeutic use
Pages: 19
ISO 20560-2:2023
Safety information for the content of piping systems and tanks — Part 2: Tanks
Pages: 17
ISO 20567-4:2023
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 4: Mobile multi-impact testing on a small testing area
Pages: 11
ISO 20658:2023
Requirements for the collection and transport of samples for medical laboratory examinations
Pages: 42
ISO 20671-2:2023
Brand evaluation — Part 2: Implementation and reporting
Pages: 19
ISO 20671-3:2023
Brand evaluation — Part 3: Requirements and recommendations for brands related to geographical indications
Pages: 12
ISO 20715:2023
Tea — Classification of tea types
Pages: 8
ISO 20766-15:2023
Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 15: Excess flow valve
Pages: 4
ISO 20766-21:2023
Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 21: Pressure and/or temperature sensors
Pages: 4
ISO 20766-7:2023
Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 7: Remotely controlled service valve with excess flow valve
Pages: 8
ISO 20766-8:2023
Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 8: Fuel pump
Pages: 4
ISO 20785-3:2023
Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 3: Measurements at aviation altitudes
Pages: 17
Replaces: ISO 20785-3:2015
ISO 20819-2:2023
Plastics — Wood-plastic recycled composites (WPRC) — Part 2: Test methods
Pages: 19
ISO 20900:2023
Intelligent transport systems — Partially-automated parking systems (PAPS) — Performance requirements and test procedures
Pages: 29
Replaces: ISO 20900:2019
ISO 20902-2:2023
Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries — Part 2: Additional procedures for pipe penetration and cable transit sealing systems
Pages: 18
ISO 20908:2023
Tyre sound emission test — Methods of drum
Pages: 38
ISO 20975-1:2023
Fibre-reinforced plastic composites — Determination of laminate through-thickness properties — Part 1: Direct tension and compression tests
Pages: 19
ISO 211:2023
Essential oils — General requirements for labelling and marking of containers
Pages: 3
Replaces: ISO/TS 211:2014
ISO 2113:2023
Reinforcement fibres — Woven fabrics — Requirements and specifications
Pages: 8
Replaces: ISO 2113:1996/Cor 1:2003
ISO 21177:2023
Intelligent transport systems — ITS station security services for secure session establishment and authentication between trusted devices
Pages: 100
ISO 21219-1:2023
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 1: Introduction, numbering and versions (TPEG2-INV)
Pages: 9
Replaces: ISO/TS 21219-1:2016
ISO 21219-10:2023
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 10: Conditional access information (TPEG2-CAI)
Pages: 7
Replaces: ISO/TS 21219-10:2016
ISO 21219-14:2023
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 14: Parking information (TPEG2-PKI)
Pages: 51
Replaces: ISO/TS 21219-14:2016
ISO 21219-15:2023
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 15: Traffic event compact (TPEG2-TEC)
Pages: 80
Replaces: ISO/TS 21219-15:2016
ISO 21219-16:2023
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 16: Fuel price information and availability (TPEG2-FPI)
Pages: 64
Replaces: ISO/TS 21219-16:2016
ISO 21219-17:2023
Intelligent transport systems — Traffic and travel information via transport protocol experts group, generation 2 (TPEG2) — Part 17: Speed information (TPEG2-SPI)
Pages: 35
ISO 21219-19:2023
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 19: Weather information (TPEG2-WEA)
Pages: 61
Replaces: ISO/TS 21219-19:2016
ISO 21219-9:2023
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 9: Service and network information (TPEG2-SNI)
Pages: 60
Replaces: ISO/TS 21219-9:2016
ISO 21349:2023
Space systems — Project reviews
Pages: 19
ISO 21349:2007
ISO 21350:2023
Space systems — Off-the-shelf item utilization
Pages: 15
Replaces: ISO 21350:2007
ISO 21467:2023
Drilling and foundation machinery — Horizontal directional drilling (HDD) machines — Commercial specifications
Pages: 17
Replaces: ISO 21467:2004
ISO 21649:2023
Needle-free injection systems for medical use — Requirements and test methods
Pages: 36
Replaces: ISO 21649:2006
ISO 2171:2023
Cereals, pulses and by-products — Determination of ash yield by incineration
Pages: 12
Replaces: ISO 2171:2007
ISO 21782-1:2023
Electrically propelled road vehicles — Test specification for electric propulsion components — Part 1: General test conditions and definitions
Pages: 18
Replaces: ISO 21782-1:2019
ISO 21805:2023
Guidance and recommendations on design, selection and installation of vents to safeguard the structural integrity of enclosures protected by gaseous fire-extinguishing systems
Pages: 36
Replaces: ISO/TS 21805:2018
ISO 21843:2023
Determination of the resistance to hydrocarbon pool fires of fire protection materials and systems for pressure vessels
Pages: 35
Replaces: ISO 21843:2018
ISO 22009:2023
Space environment (natural and artificial) — Model of the Earth’s magnetospheric magnetic field
Pages: 17
Replaces: ISO 22009:2009
ISO 22028-3:2023
Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and interchange — Part 3: Reference input medium metric RGB colour image encoding (RIMM RGB)
Pages: 24
Replaces: ISO/TS 22028-3:2012
ISO 22097:2023
Thermal insulation for buildings — Reflective insulation products — Determination of thermal performance
Pages: 30
ISO 22135:2023
Road vehicles — Heavy commercial vehicles and buses — Calculation method for steady-state rollover threshold
Pages: 10
ISO 22195-1:2023
Textiles — Determination of index ingredient from coloured textile — Part 1: Madder
Pages: 9
Replaces: ISO 22195-1:2020
ISO 22195-2:2023
Textiles — Determination of index ingredient from coloured textile — Part 2: Turmeric
Pages: 9
Replaces: ISO 22195-2:2020
ISO 22328-3:2023
Security and resilience — Emergency management — Part 3: Guidelines for the implementation of a community-based early warning system for tsunamis
Pages: 15
ISO 22342:2023
Security and resilience — Protective security — Guidelines for the development of a security plan for an organization
Pages: 11
ISO 22385:2023
Security and resilience — Authenticity, integrity and trust for products and documents — Guidelines to establish a framework for trust and interoperability
Pages: 16
ISO 22476-5:2023
Geotechnical investigation and testing — Field testing — Part 5: Prebored pressuremeter test
Pages: 37
Replaces: ISO 22476-5:2012
ISO 22519:2023
Membrane-based generation of water for injection (WFI)
Pages: 9
ISO 22526-4:2023
Plastics — Carbon and environmental footprint of biobased plastics — Part 4: Environmental (total) footprint (Life cycle assessment)
Pages: 26
ISO 226:2023
Acoustics — Normal equal-loudness-level contours
Pages: 20
Replaces: ISO 226:2003
ISO 22640:2023
Rubber — Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
Pages: 8
ISO 22705-2:2023
Springs — Measurement and test parameters — Part 2: Cold formed cylindrical helical extension springs
Pages: 38
ISO 22712:2023
Refrigerating systems and heat pumps — Competence of personnel
Pages: 26
ISO 22915-10:2023
Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
Pages: 6
ISO 22915-10:2008
ISO 22915-20:2023
Industrial trucks — Verification of stability — Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization
Pages: 6
Replaces: ISO 22915-20:2008
ISO 22932-3:2023
Mining – Vocabulary — Part 3: Rock mechanics
Pages: 41
ISO 22932-4:2023
Mining — Vocabulary — Part 4: Prospecting and exploration
Pages: 46
ISO 22932-5:2023
Mining — Vocabulary — Part 5: Drilling and blasting
Pages: 51
ISO 22935-1:2023
Milk and milk products — Sensory analysis — Part 1: Recruitment, selection, training and monitoring of assessors
Pages: 17
Replaces: ISO 22935-1:2009
ISO 22935-2:2023
Milk and milk products — Sensory analysis — Part 2: Methods for sensory evaluation
Pages: 23
Replaces: ISO 22935-2:2009
ISO 22935-3:2023
Milk and milk products — Sensory analysis — Part 3: Method for evaluation of compliance with product specifications for sensory properties by scoring
Pages: 7
Replaces: ISO 22935-3:2009
ISO 23117-1:2023
Agricultural and forestry machinery — Unmanned aerial spraying systems — Part 1: Environmental requirements
Pages: 7
ISO 23150:2023
Road vehicles — Data communication between sensors and data fusion unit for automated driving functions — Logical interface
Pages: 344
Replaces: ISO 23150:2021
ISO 2322:2023
Styrene-butadiene rubber (SBR) — Emulsion- and solution-polymerized types — Evaluation procedures
Pages: 17
Replaces: ISO 2322:2014
ISO 23230:2023
Space systems — Paints and varnishes — Processes, procedures, and requirements for coating materials and coatings
Pages: 17
ISO 23256:2023
Water quality — Detection of selected congeners of polychlorinated dibenzo-p-dioxins and polychlorinated biphenyls — Method using a flow immunosensor technique
Pages: 37
ISO 23298:2023
Dentistry — Test methods for machining accuracy of computer-aided milling machines
Pages: 46
Replaces: ISO/TR 18845:2017
ISO 233-3:2023
Information and documentation — Transliteration of Arabic characters into Latin characters — Part 3: Persian language — Transliteration
Pages: 13
Replaces: ISO 233-3:1999
ISO 23375:2023
Intelligent transport systems — Collision evasive lateral manoeuvre systems (CELM) — Requirements and test procedures
Pages: 31
ISO 23401-1:2023
Dentistry — Chairside denture base relining materials — Part 1: Hard type materials
Pages: 12
ISO 23416:2023
General specifications and testing methods for temperature-sensitive medicinal packages in good distribution practice principles
Pages: 16
ISO 23460:2023
Space projects — Programme management — Dependability assurance requirements
Pages: 18
Replaces: ISO 23460:2011
ISO 23551-8:2023
Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 8: Multifunctional controls
Pages: 31
Replaces: ISO 23551-8:2016/Amd 1:2019
ISO 23582-1:2023
Plastics and rubber machines — Clamping systems — Part 1: Safety requirements for magnetic clamping systems
Pages: 11
ISO 23588:2023
Radiological protection — General requirements for proficiency tests for in vivo radiobioassay
Pages: 13
ISO 23684:2023
Road vehicles — Technical personnel dealing with natural gas vehicles (NGVs) — Training and qualification
Pages: 30
ISO 23696-1:2023
Water quality — Determination of nitrate in water using small-scale sealed tubes — Part 1: Dimethylphenol colour reaction
Pages: 8
ISO 24190:2023
Biotechnology — Analytical methods — Risk-based approach for method selection and validation for rapid microbial detection in bioprocesses
Pages: 44
ISO 24218-1:2023
Fine bubble technology — Characterization of fine bubbles — Part 1: Evaluation of size and concentration indices by laser diffraction method
Pages: 11
ISO 24245:2023
Space systems — Global navigation satellite system (GNSS) receiver class codes
Pages: 17
ISO 24352:2023
Technical requirements for small unmanned aircraft electric energy systems
Pages: 19
ISO 24355:2023
Flight control system for civil small and light multicopter unmanned aircraft system (UAS) — General requirements
Pages: 10
ISO 24363:2023
Determination of fatty acid methyl esters (cis and trans) and squalene in olive oil and other vegetable oils by gas chromatography
Pages: 22
ISO 24389-1:2023
Management of radioactive waste from nuclear facilities — Part 1: General principles, objectives and practical approaches
Pages: 15
ISO 24409-4:2023
Ships and marine technology — Design, location and use of shipboard safety signs, fire control plan signs, safety notices and safety markings — Part 4: Escape plan signs used for general emergency information
Pages: 15
ISO 24412:2023
Space systems — Thermal vacuum environmental testing
Pages: 30
ISO 24465:2023
Surface chemical analysis — Determination of the minimum detectability of surface plasmon resonance device
Pages: 9
ISO 24469:2023
Road wear test of studded tyres
Pages: 11
ISO 24483:2023
Epoxidized natural rubber — Specifications
Pages: 4
ISO 24495-1:2023
Plain language — Part 1: Governing principles and guidelines
Pages: 14
ISO 24540:2023
Principles for effective and efficient corporate governance of water utilities
Pages: 27
ISO 24553:2023
Ergonomics — Accessible design — Ease of operation
Pages: 61
ISO 24569:2023
Ships and marine technology — External firefighting system test methods
Pages: 8
ISO 24575:2023
General principles and guidelines for cost analysis in planning of decentralized wastewater treatment and/or reuse
Pages: 22
ISO 24620-4:2023
Language resource management — Controlled human communication (CHC) — Part 4: Basic principles and methodology for stylistic guidelines (BSG)
Pages: 21
ISO 24647:2023
Non-destructive testing — Robotic ultrasonic test systems — General requirements
Pages: 34
ISO 24681:2023
Ships and marine technology — Fibre-reinforced plastic gratings
Pages: 14
ISO 24684-2:2023
Aggregates for concrete — Test methods for chemical properties — Part 2: Determination of soluble sulfate salts
Pages: 6
ISO 24687:2023
Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement of Seebeck coefficient and electrical conductivity of bulk-type thermoelectric materials at room and high temperatures
Pages: 21
ISO 252:2023
Conveyor belts – Adhesion between constitutive elements — Test methods
Pages: 6
ISO 255:2023
Belt drives — Pulleys for V-belts (system based on datum width) — Geometrical inspection of grooves
Pages: 12
Replaces: ISO 255:1990
ISO 25980:2023
Health and safety in welding and allied processes — Transparent welding curtains, strips and screens for arc welding processes
Pages: 15
Replaces: ISO 25980:2014
ISO 2613-1:2023
Analysis of natural gas — Silicon content of biomethane — Part 1: Determination of total silicon by atomic emission spectroscopy (AES)
Pages: 13
ISO 26162-3:2023
Management of terminology resources — Terminology databases — Part 3: Content
Pages: 2
ISO 262:2023
ISO general purpose metric screw threads — Selected sizes for bolts, screws, studs and nuts
Pages: 3
Replaces: ISO 262:1998
ISO 27145-6:2023
Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 6: External test equipment
Pages: 32
Replaces: ISO 27145-6:2015
ISO 27971:2023
Cereals and cereal products — Common wheat (Triticum aestivum L.) — Determination of Alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology
Pages: 56
Replaces: ISO 27971:2015
ISO 2811-1:2023
Paints and varnishes — Determination of density — Part 1: Pycnometer method
Pages: 10
Replaces: ISO 2811-1:2016
ISO 283:2023
Textile conveyor belts — Full thickness tensile strength, elongation at break and elongation at the reference load — Test method
Pages: 10
Replaces: ISO 283:2015
ISO 28560-1:2023
Information and documentation — RFID in libraries — Part 1: Data elements and general guidelines for implementation
Pages: 27
Replaces: ISO 28560-1:2014
ISO 28560-3:2023
Information and documentation — RFID in libraries — Part 3: Fixed length encoding
Pages: 25
ISO 28564-4:2023
Public information guidance systems — Part 4: Installation and assessment
Pages: 10
ISO 293:2023
Plastics — Compression moulding of test specimens of thermoplastic materials
Pages: 7
Để biết thêm thông tin về các Tiêu chuẩn trên, Quý doanh nghiệp có thể liên hệ trực tiếp với Trung tâm Thông tin – Truyền thông theo số điện thoại: (024)37564268 hoặc (024)37562608; Fax: (024)38361556;
Email: ismq@tcvn.gov.vn
