- ISO 29585:2023
Health informatics — Framework for healthcare and related data reporting
Pages: 40
Replaces: ISO/TS 29585:2010
- ISO 3021:2023
Adventure tourism — Hiking and trekking activities — Requirements and recommendations
Pages: 29
- ISO 30405:2023
Human resource management — Guidelines on recruitment
Pages: 16
Replaces: ISO 30405:2016
- ISO 30434:2023
Human resource management — Workforce allocation
Pages: 38
- ISO 3136:2023
Rubber latex — Styrene-butadiene — Determination of bound styrene content
Pages: 4
Replaces: ISO 3136:1983
- ISO 3169:2023
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of impurities in aluminium oxide powders using inductively coupled plasma-optical emission spectrometry
Pages: 12
- ISO 31700-1:2023
Consumer protection — Privacy by design for consumer goods and services — Part 1: High-level requirements
Pages: 37
- ISO 3245:2023
Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
Pages: 15
Replaces: ISO 3245:2015
- ISO 3252:2023
Powder metallurgy — Vocabulary
Pages: 41
Replaces: ISO 3252:2019
- ISO 3262-13:2023
Extenders — Specifications and methods of test — Part 13: Natural quartz (ground)
Pages: 4
Replaces: ISO 3262-13:1997
- ISO 3262-15:2023
Extenders — Specifications and methods of test — Part 15: Vitreous silica
Pages: 4
Replaces: ISO 3262-15:2000
- ISO 3262-16:2023
Extenders — Specifications and methods of test — Part 16: Aluminium hydroxides
Pages: 4
Replaces: ISO 3262-16:2000
- ISO 3262-2:2023
Extenders — Specifications and methods of test — Part 2: Baryte (natural barium sulfate)
Pages: 8
Replaces: ISO 3262-2:1998
- ISO 3262-21:2023
Extenders — Specifications and methods of test — Part 21: Silica sand (unground natural quartz)
Pages: 4
Replaces: ISO 3262-21:2000
- ISO 3262-22:2023
Extenders — Specifications and methods of test — Part 22: Flux-calcined kieselguhr
Pages: 4
Replaces: ISO 3262-22:2001
- ISO 3262-3:2023
Extenders — Specifications and methods of test — Part 3: Blanc fixe
Pages: 7
Replaces: ISO 3262-3:1998
- ISO 3262-4:2023
Extenders — Specifications and methods of test — Part 4: Whiting
Pages: 4
Replaces: ISO 3262-4:1998
- ISO 3262-5:2023
Extenders — Specifications and methods of test — Part 5: Natural crystalline calcium carbonate
Pages: 4
Replaces: ISO 3262-5:1998
- ISO 3262-8:2023
Extenders — Specifications and methods of test — Part 8: Natural clay
Pages: 8
Replaces: ISO 3262-8:1999
- ISO 3323:2023
Aircraft — Hydraulic components — Marking to indicate the fluid for which a component is approved
Pages: 4
Replaces: ISO 3323:1987
- ISO 3402:2023
Tobacco and tobacco products — Atmosphere for conditioning and testing
Pages: 3
Replaces: ISO 3402:1999
- ISO 3444:2023
Stainless-steel wire ropes
Pages: 18
- ISO 3547-2:2023
Plain bearings — Wrapped bushes — Part 2: Test data for outside and inside diameters
Pages: 12
Replaces: ISO 3547-2:2017
- ISO 3548-3:2023
Plain bearings — Thin-walled half bearings with or without flange — Part 3: Determination of the peripheral length
Pages: 40
Replaces: ISO 3548-3:2012
- ISO 3611:2023
Geometrical product specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of micrometers for external measurements
Pages: 14
Replaces: ISO 3611:2010
- ISO 3630-2:2023
Dentistry — Endodontic instruments — Part 2: Enlargers
Pages: 13
Replaces: ISO 3630-2:2013
- ISO 3691-2:2023
Industrial trucks — Safety requirements and verification — Part 2: Self-propelled variable-reach trucks
Pages: 46
Replaces: ISO 3691-2:2016
- ISO 3691-3:2016/Amd 1:2023
Industrial trucks — Safety requirements and verification — Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads — Amendment 1
Pages: 5
- ISO 3691-4:2023
Industrial trucks — Safety requirements and verification — Part 4: Driverless industrial trucks and their systems
Pages: 74
Replaces: ISO 3691-4:2020
- ISO 37109:2023
Sustainable cities and communities — Recommendations and requirements for project developers — Meeting ISO 37101 framework principles
Pages: 32
- ISO 37184:2023
Sustainable mobility and transportation — Framework for transportation services by providing meshes for 5G communication
Pages: 7
- ISO 3785:2023
Metallic materials — Designation of test specimen axes in relation to product texture
Pages: 9
Replaces: ISO 3785:2006
- ISO 3826-1:2019/Amd 1:2023
Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers — Amendment 1
Pages: 1
- ISO 3894:2023
Road vehicles — Wheels/rims for commercial vehicles — Test methods
Pages: 9
Replaces: ISO 3894:2015
- ISO 3977-2:2023
Gas turbines — Procurement — Part 2: Standard reference conditions and ratings
Pages: 3
Replaces: ISO 3977-2:1997
- ISO 3995:2023
Metallic powders — Determination of green strength by transverse rupture of rectangular compacts
Pages: 8
- ISO 4063:2023
Welding, brazing, soldering and cutting — Nomenclature of processes and reference numbers
Pages: 18
Replaces: ISO 4063:2009
- ISO 4077:2023
Coal — Guidance for sampling in coal preparation plants
Pages: 63
- ISO 41015:2023
Facility management — Influencing organizational behaviours for improved facility outcomes
Pages: 24
- ISO 4210-1:2023
Cycles — Safety requirements for bicycles — Part 1: Vocabulary
Pages: 10
Replaces: ISO 4210-1:2014
- ISO 4210-2:2023
Cycles — Safety requirements for bicycles — Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles
Pages: 33
Replaces: ISO 4210-2:2015
- ISO 4210-3:2023
Cycles — Safety requirements for bicycles — Part 3: Common test methods
Pages: 12
Replaces: ISO 4210-3:2014
- ISO 4210-4:2023
Cycles — Safety requirements for bicycles — Part 4: Braking test methods
Pages: 31
Replaces: ISO 4210-4:2014
- ISO 4210-5:2023
Cycles — Safety requirements for bicycles — Part 5: Steering test methods
Pages: 13
Replaces: ISO 4210-5:2014
- ISO 4210-6:2023
Cycles — Safety requirements for bicycles — Part 6: Frame and fork test methods
Pages: 29
Replaces: ISO 4210-6:2015
- ISO 4210-7:2023
Cycles — Safety requirements for bicycles — Part 7: Wheel and rim test methods
Pages: 10
Replaces: ISO 4210-7:2014
- ISO 4210-8:2023
Cycles — Safety requirements for bicycles — Part 8: Pedal and drive system test methods
Pages: 9
Replaces: ISO 4210-8:2014
- ISO 4210-9:2023
Cycles — Safety requirements for bicycles — Part 9: Saddles and seat-post test methods
Pages: 8
Replaces: ISO 4210-9:2014
- ISO 4212:2023
Corrosion of metals and alloys — Method of oxalic acid etching test for intergranular corrosion of austenitic stainless steel
Pages: 6
- ISO 4233:2023
Reactor technology — Nuclear fusion reactors — Hot helium leak testing method for high temperature pressure-bearing components in nuclear fusion reactors
Pages: 12
- ISO 4250-1:2023
Earth-mover tyres and rims — Part 1: Tyre designation and dimensions
Pages: 24
Replaces: ISO 4250-1:2017
- ISO 4250-2:2023
Earth-mover tyres and rims — Part 2: Loads and inflation pressures
Pages: 27
Replaces: ISO 4250-2:2017
- ISO 4254-13:2023
Agricultural machinery — Safety — Part 13: Large rotary mowers
Pages: 32
- ISO 4266-1:2023
Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 1: Measurement of level in atmospheric tanks
Pages: 19
Replaces: ISO 4266-1:2002
- ISO 4289:2023
High velocity oxygen fuel (HVOF) cermet coatings for metallurgical roll components — Guidance with requirements
Pages: 11
- ISO 4358:2023
Test methods for civil multi-copter unmanned aircraft system
Pages: 26
- ISO 4427-2:2019/Amd 1:2023
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes — Amendment 1
Pages: 2
- ISO 4484-1:2023
Textiles and textile products — Microplastics from textile sources — Part 1: Determination of material loss from fabrics during washing
Pages: 11
- ISO 4484-3:2023
Textiles and textile products — Microplastics from textile sources — Part 3: Measurement of collected material mass released from textile end products by domestic washing method
Pages: 28
- ISO 4491-1:2023
Metallic powders — Determination of oxygen content by reduction methods — Part 1: General guidelines
Pages: 4
Replaces: ISO 4491-1:1989
- ISO 4491-2:2023
Metallic powders — Determination of oxygen content by reduction methods — Part 2: Loss of mass on hydrogen reduction (hydrogen loss)
Pages: 8
Replaces: ISO 4491-2:1997
- ISO 45002:2023
Occupational health and safety management systems — General guidelines for the implementation of ISO 45001:2018
Pages: 70
- ISO 4504:2023
Plastics — Polyethylene (PE) — Determination of co-monomer content by solution state 13C-NMR spectrometry
Pages: 25
- ISO 4529:2023
Industrial furnaces and associated processing equipment — Secondary steelmaking — Machinery and equipment for treatment of liquid steel
Pages: 54
- ISO 4548-14:2023
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 14: Hydraulic pulse durability for composite filter housings
Pages: 7
Replaces: ISO 4548-14:2016
- ISO 4564:2023
Traditional Chinese medicine — Scutellaria baicalensis root
Pages: 12
- ISO 4618:2023
Paints and varnishes — Vocabulary
Pages: 39
Replaces: ISO 4618:2014
- ISO 4624:2023
Paints and varnishes — Pull-off test for adhesion
Pages: 12
Replaces: ISO 4624:2016
- ISO 4669-1:2023
Document management — Information classification, marking and handling — Part 1: Requirements
Pages: 31
- ISO 4679:2023
Ships and marine technology — Hydraulic performance tests for waterjet propulsion system
Pages: 18
- ISO 4789:2023
Guidelines for wastewater treatment and reuse in thermal power plants
Pages: 29
- ISO 4825-1:2023
Fine ceramics (advanced ceramics, advanced technical ceramics) –Test method for thermal property measurements of metalized ceramic substrates — Part 1: Evaluation of thermal resistance for use in power modules
Pages: 12
- ISO 4845:2023
Ships and marine technology — Combined rigging for deep-sea mooring
Pages: 11
- ISO 4853:2023
Ships and marine technology — A-frame launch and recovery system
Pages: 10
- ISO 4857:2023
Ships and marine technology — Test procedures and methods for windlasses and winches
Pages: 7
- ISO 4861:2023
Ships and marine technology — Piling barge winches
Pages: 8
- ISO 4905:2023
Corrosion of metals and alloys — Electrochemical test methods for high-temperature corrosion testing of metallic materials in molten salts
Pages: 13
- ISO 4907-1:2023
Plastics — Ion exchange resin — Part 1: Determination of exchange capacity of acrylic anion exchange resins
Pages: 16
- ISO 4907-2:2023
Plastics — Ion exchange resin — Part 2: Determination of water content of anion exchange resins in hydroxide form by centrifugation
Pages: 8
- ISO 4907-3:2023
Plastics — Ion exchange resin — Part 3: Determination of exchange capacity of anion exchange resins in hydroxide form
Pages: 11
- ISO 4980:2023
Benefit-risk assessment for sports and recreational facilities, activities and equipment
Pages: 49
- ISO 4998:2023
Steel sheet, zinc‐coated and zinc‐iron alloy‐coated by the continuous hot‐dip process, of structural quality
Pages: 14
Replaces: ISO 4998:2014
- ISO 5054-1:2023
Specification for an enterprise canonical model — Part 1: Architecture
Pages: 18
- ISO 5139:2023
Dentistry — Polymer-based composite machinable blanks
Pages: 18
- ISO 5158:2023
Mobile financial services — Customer identification guidelines
Pages: 23
- ISO 5162:2023
Textiles — Quality labelling specification for dehaired cashmere
Pages: 13
- ISO 5173:2023
Destructive tests on welds in metallic materials — Bend tests
Pages: 24
Replaces: ISO 5173:2009
- ISO 52000-3:2023
Energy performance of buildings — Overarching EPB assessment — Part 3: General principles for determination and reporting of primary energy factors (PEF) and CO2 emission coefficients
Pages: 36
- ISO 5260:2023
Epoxidized natural rubber — Determination of epoxidation and ring opening level by NMR spectrometry
Pages: 9
- ISO 5263-3:2023
Pulps — Laboratory wet disintegration — Part 3: Disintegration of mechanical pulps at ≥85°C
Pages: 13
Replaces: ISO 5263-3:2004
- ISO 527-4:2023
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
Pages: 28
Replaces: ISO 527-4:2021
- ISO 535:2023
Paper and board — Determination of water absorptiveness — Cobb method
Pages: 10
Replaces: ISO 535:2014
- ISO 5361:2023
Anaesthetic and respiratory equipment — Tracheal tubes and connectors
Pages: 45
Replaces: ISO 5361:2016
- ISO 5370:2023
Solid biofuels — Determination of fines content in pellets
Pages: 18
- ISO 5430:2023
Plastics — Ecotoxicity testing scheme for soluble decomposition intermediates from biodegradable plastic materials and products used in the marine environment — Test methods and requirements
Pages: 14
- ISO 5476:2023
Ships and marine technology — Virtual reality and simulation training systems for lifesaving appliances and arrangements
Pages: 16
- ISO 5491:2023
Vertiports — Infrastructure and equipment for vertical take-off and landing (VTOL) of electrically powered cargo unmanned aircraft systems (UAS)
Pages: 11
- ISO 5528:2023
Ships and marine technology — Deep-sea hydraulic winch equipment
Pages: 8
- ISO 5540:2023
Ships and marine technology — Sea-going vessels — Dual traction/stowage winches for oceanographic research
Pages: 9
- ISO 5556:2023
Ships and marine technology — Sea-going vessels — Single-drum winches for oceanographic research
Pages: 10
- ISO 5593:2023
Rolling bearings — Vocabulary
Pages: 344
- ISO 5667-1:2023
Water quality — Sampling — Part 1: Guidance on the design of sampling programmes and sampling techniques
Pages: 39
Replaces: ISO 5667-1:2020
- ISO 5671:2023
Spices and condiments — Dried chive (Allium schoenoprasum L.), cut and ground — Specification
Pages: 4
- ISO 5676:2023
Tractors and machinery for agriculture and forestry — Hydraulic coupling — Braking circuit
Pages: 3
Replaces: ISO 5676:1983
- ISO 5677:2023
Testing and characterization of mechanically recycled polypropylene (PP) and polyethylene (PE) for intended use in different plastics processing techniques
Pages: 6
Để biết thêm thông tin về các tiêu chuẩn, Quý doanh nghiệp có thể liên hệ trực tiếp với Trung tâm Thông tin – Truyền thông theo số điện thoại: (024)37564268 hoặc (024)37562608; Fax: (024)38361556;
Email: ismq@tcvn.gov.vn
