Tin tức
Trang chủ   /   Tin tức   /   Danh mục tiêu chuẩn về lĩnh vực dầu mỏ

Danh mục tiêu chuẩn về lĩnh vực dầu mỏ

Danh mục tiêu chuẩn về lĩnh vực dầu mỏ tháng 7

ISO 4925:2020

Road vehicles — Specification of non-petroleum-based brake fluids for hydraulic systems

Pages: 25

Replaces: ISO 4925:2005

PD ISO/TR 29662:2020

Petroleum products and other liquids. Guidance for flash point and combustibility testing

Pages: 24
ASTM D7623 – 20 

Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method

Pages: 6

Replaces:ASTM D7623-10(15)

ASTM D7622 – 20 

Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction

Pages: 5

Replaces:ASTM D7622-10(15)

ASTM D6377 – 20 

Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)

Pages: 8

Replaces: ASTM  D6377-16

ASTM D6470 – 99(2020) 

Standard Test Method for Salt in Crude Oils (Potentiometric Method)

 Pages: 6

Replaces:ASTM D6470-99(15)

ASTM D7578 – 20 

Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants

 Pages: 13

Replaces: ASTM D7578-18

ASTM D6892 – 03(2020) 

Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)

 Pages: 5

Replaces:ASTM D6892-03(14)

ASTM D7214 – 20 

Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation

Pages: 7

Replaces: ASTM D7214-07a

ASTM D2265 – 20 

Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range

Pages: 6

Replaces: ASTM D2265-19

ASTM D2509 – 20 

Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)

Pages: 9

Replaces: ASTM D2509-14e1

ASTM D1478 – 20 

Standard Test Method for Low-Temperature Torque of Ball Bearing Grease

Pages: 7

Replaces: ASTM D1478-18

ASTM D7416 – 09(2020) 

Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscometer) Integrated Tester

 Pages: 14

Replaces:ASTM D7416-09(15)

ASTM D7155 – 20 

Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils

 Pages: 10

Replaces: ASTM D7155-18

ASTM D7040 – 04(2020) 

Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

 Pages: 6

Replaces:ASTM D7040-04(15)

ASTM D566 – 20 

Standard Test Method for Dropping Point of Lubricating Grease

 Pages: 5

Replaces: ASTM D566-17

ASTM D4741 – 20 

Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer

Pages: 6

Replaces: ASTM D4741-18

ASTM D4684 – 20 

Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

Pages: 14

Replaces: ASTM D4684-18

ASTM D4683 – 20 

Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C

Pages: 12

Replaces: ASTM  D4683-17

ASTM D3829 – 20 

Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil

Pages: 8

Replaces: ASTM D3829-18

ASTM D2710 – 20 

Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration

Pages: 5

Replaces:ASTM D2710-09(18)

ASTM D2596 – 20 

Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)

Pages: 6

Replaces: ASTM D2596-15

ASTM D2415 – 20 

Standard Test Method for Ash in Coal Tar and Pitch

Pages: 3

Replaces: ASTM D2415-15

ASTM D2319 / D2319M – 20 

Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)

Pages: 3

Replaces:

ASTM D2319/D2319M-14e1

ASTM D2318 – 20 

Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch

Pages: 12

Replaces: ASTM D7039-15a

ASTM D6986 – 03(2020) 

Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)

 Pages: 5

Replaces:ASTM D6986-03(16)

ASTM D7833 – 20 

Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography

Pages: 10

Replaces: ASTM D7833-14

DIN EN ISO 35101

Petroleum and natural gas industries – Arctic operations – Working environment (ISO 35101:2017); German version EN ISO 35101:2019

Pages:59

Replaces:DIN EN ISO 35101 (2019-06)

DIN EN ISO 35104

Petroleum and natural gas industries – Arctic operations – Ice management (ISO 35104:2018); English version prEN ISO 35104:2020

Pages:108

DIN EN ISO 14935

Petroleum and related products – Determination of wick flame persistence of fire-resistant fluids (ISO 14935:2020); German version EN ISO 14935:2020

Pages:18

Replaces:DIN EN ISO 14935 (1998-12)*DIN EN ISO 14935 (2019-03)

DIN 51828-1

Testing of lubricants and related products – Determination of the biodegradability – Part 1: General working principles

Pages:9

DIN 54389

Solid recovered fuels – Obtaining representative laboratory samples from heterogeneous materials by bale sampling

Pages:19

Replaces:DIN 54389 (2018-10)

DIN 51784

Testing of liquid fuels – Determination of content of lubricating oils of lubricated petrol on the determination of test gum content in hydrocarbons by jet evaporation

Pages:7

Replaces:DIN 51784 (1983-01)*DIN 51784 (2019-12)

DIN EN ISO 8973

Liquefied petroleum gases – Calculation method for density and vapour pressure (ISO 8973:1997 + Amd 1:2020); German version EN ISO 8973:1999 + A1:2020

Pages:14

Replaces:DIN EN ISO 8973 (2000-03)*DIN EN ISO 8973/A1 (2019-09)

DIN EN ISO 19903

Petroleum and natural gas industries – Concrete offshore structures (ISO 19903:2019); English version EN ISO 19903:2019, only on CD-ROM

Pages:141

Replaces:DIN EN ISO 19903 (2007-04)*DIN EN ISO 19903 (2017-11)

 

Danh mục tiêu chuẩn về lĩnh vực dầu mỏ tháng 8

TCVN 12797:2019

Khí thiên nhiên. Phân tích mở rộng. Phương pháp sắc ký khí

Số trang:33

TCVN 12798:2019

Khí thiên nhiên. Phương pháp tính nhiệt trị, khối lượng riêng, tỷ khối và chỉ số wobbe từ thành phần

Số trang:65

TCVN 12799:2019

Lưu chất hydrocacbon nhẹ được làm lạnh. Lấy mẫu khí thiên nhiên hóa lỏng. Phương pháp liên tục và gián đoạn

Số trang:26

TCVN 12800:2019

Khí thiên nhiên. Xác định hợp chất lưu huỳnh. Xác định hàm lượng lưu huỳnh tổng bằng phương pháp huỳnh quang tử ngoại

Số trang:17

TCVN 12801:2019

Khí thiên nhiên. Phương pháp tính trị số metan

Số trang:18

TCVN 12802:2019

Nhiên liệu dạng khí. Xác định hàm lượng hơi nước bằng phép đo nhiệt độ điểm sương

Số trang:20

ISO 35102:2020

Petroleum and natural gas industries — Arctic operations — Escape, evacuation and rescue from offshore installations

Pages: 107

ISO 4259-3:2020

Petroleum and related products — Precision of measurement methods and results — Part 3: Monitoring and verification of published precision data in relation to methods of test

Pages: 14

ISO/TR 29662:2020

Petroleum products and other liquids — Guidance for flash point and combustibility testing

Pages: 15

Replaces: ISO/TR 29662:2009

ISO 4926:2020

Road vehicles — Hydraulic braking systems — Non-petroleum-based reference fluid

Pages: 2

ISO 11960:2020

Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells

Pages: 267

Replaces: ISO 11960:2014

ISO 13680:2020

Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material — Technical delivery conditions

Pages: 125

Replaces: ISO 13680:2010

ISO 5165:2020

Petroleum products — Determination of the ignition quality of diesel fuels — Cetane engine method

Pages: 20

Replaces: ISO 5165:2017

ISO 8222:2020

Petroleum measurement systems — Calibration — Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials)

Pages: 70

Replaces: ISO 8222:2002

PD CEN/TS 17481:2020

Bitumen and bituminous binders. Determination of salt content in bitumen. Electrical conductivity method

Pages:16

PD CEN/TS 17482:2020

Bitumen and bituminous binders. Determination of acid number of bitumen. Potentiometric method

Pages:16

BS ISO 587:2020

Coal and coke. Determination of chlorine using Eschka mixture

Pages:16

Replaces: BS 1016-106.6.1:1997, ISO 587:1997

BS EN 16808:2020

Petroleum, petrochemical and natural gas industries. Safety of machineries. Manual elevators

Pages:36

BS EN ISO 5165:2020

Petroleum products. Determination of the ignition quality of diesel fuels. Cetane engine method

Pages: 28

Replaces: BS EN ISO 5165:2018

ASTM D5708 – 15(2020)e1 

Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry

Pages: 9

Replaces: ASTM D5708-15

ASTM D4310 – 20a 

Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils

Pages: 13

Replaces: ASTM D4310-10(2015)

ASTM D8149 – 20 

Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants

Pages: 11

Replaces: ASTM D8149-17

ASTM D86 – 20a 

Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure

Pages: 29

Replaces: ASTM D86-19

ASTM D5482 – 20a 

Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method—Atmospheric)

Pages: 6

Replaces: ASTM D5482-07(2013)

ASTM D7260 – 20 

Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants

Pages: 10

Replaces: ASTM D7260-19

ASTM D7873 – 20 

Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method)

Pages: 9

Replaces: ASTM D7873-13(2017)

ASTM D3525 – 20 
Standard Test Method for Gasoline Fuel Dilution in Used Gasoline Engine Oils by Wide-Bore Capillary Gas Chromatography

Pages: 7

Replaces: ASTM D3525-04(2016)

ASTM D3228 – 20 

Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method

Pages: 5

Replaces: ASTM D3228-08(2019)

ASTM D943 – 20 

Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils

Pages: 11

Replaces: ASTM D943-19

ASTM D3336 – 20a 

Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures

Pages: 8

Replaces: ASTM D3336-18

ASTM D8111 – 20a 

Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine

Pages: 41

Replaces: ASTM D8111-19b

ASTM D8048 – 20 
Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine

Pages: 42

Replaces: ASTM D8048-19a

ASTM D7216 – 20 
Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers

Pages: 14

Replaces: ASTM D7216-19

ASTM D7038 – 20 

Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants

Pages: 28

Replaces: ASTM D7038-19

ASTM D4054 – 20a 

Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives

Pages: 45

Replaces: ASTM D4054-19

ASTM D3241 – 20a 
Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels

Pages: 26

Replaces: ASTM D3241-19b

ASTM D7566 – 20a 

Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons

Pages: 37

Replaces: ASTM D7566-19b

ASTM D3606 – 20 

Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography

Pages: 27

Replaces: ASTM D3606-17

ASTM D1655 – 20b 

Standard Specification for Aviation Turbine Fuels

Pages: 19

Replaces: ASTM D1655-19a

ASTM D1655 – 20b 

Standard Specification for Aviation Turbine Fuels

Pages: 19

Replaces: ASTM D1655-19a

ASTM D7451 – 20 

Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark-Ignition Engine Fuels

Pages: 5

Replaces: ASTM D7451-19

ASTM D5186 – 20 

Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels By Supercritical Fluid Chromatography

Pages: 7

Replaces: ASTM D5186-19

ASTM D5001 – 19e1 

Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)

Pages: 12

Replaces: ASTM D5001-19

JIS Z 8801-1:2019

Test sieves — Part 1: Test sieves of metal wire cloth

Pages: 26

Replaces: JIS Z 8801-1:2006

DIN EN 15199-4

Petroleum products – Determination of boiling range distribution by gas chromatography method – Part 4: Light fractions of crude oil; German and English version prEN 15199-4:2020

Pages:66

DIN EN ISO 4259-3

Petroleum and related products – Precision of measurement methods and results – Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020); German version EN ISO 4259-3:2020

Pages:25

Replaces:DIN EN ISO 4259-3 (2020-05)

DIN 51810-4

Testing of lubricants – Determination of the consistency of metal saponified lubricating greases using an oscillatory rheometer with a cone/plate system

Pages:18

DIN EN 228 Berichtigung 1

Automotive fuels – Unleaded petrol – Requirements and test methods; German version EN 228:2012+A1:2017;Corrigendum 1

Pages:2

DIN EN ISO 17225-5

Solid biofuels – Fuel specifications and classes – Part 5: Graded firewood (ISO/DIS 17225-5:2020); German and English version prEN ISO 17225-5:2020

Pages:34

DIN EN ISO 17225-6

Solid biofuels – Fuel specifications and classes – Part 6: Graded non-woody pellets (ISO/DIS 17225-6:2020); German and English version prEN ISO 17225-6:2020

Pages:29

DIN EN ISO 17225-7

Solid biofuels – Fuel specifications and classes – Part 7: Graded non-woody briquettes (ISO/DIS 17225-7:2020); German and English version prEN ISO 17225-7:2020

Pages:26

DIN EN ISO 18797-2

Petroleum, petrochemical and natural gas industries – External corrosion protection of risers by coatings and linings – Part 2: Maintenance and field repair coatings for riser pipes (ISO/DIS 18797-2:2020); English version prEN ISO 18797-2:2020

Pages:74

DIN EN ISO 20257-2

Installation and equipment for liquefied natural gas – Design of floating LNG installations – Part 2: Specific FSRU issues (ISO/DIS 20257-2:2020); German and English version prEN ISO 20257-2:2020

Pages:100