Danh mục tiêu chuẩn DIN ban hành tháng 9/2023:
Biotechnology – Biobanking – Requirements for sample certificates for biological material and associated data; Text in German and English
Child care articles – Carry cots and stands for domestic use – Safety requirements and test methods; German version EN 1466:2023
Aerospace series – Screw, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2885:2023
Aerospace series – Screw, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2886:2023
Aerospace series – Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, in steel, cadmium plated, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 4269:2023
Aerospace series – Rivet-collar-system, aluminium alloy, shear type, inch series – Technical Specification; German and English version EN 6052:2022
Cold rolled low carbon steel flat products for vitreous enamelling – Technical delivery conditions; German version EN 10209:2023
Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW – Part 1: Terms and definitions; German version EN 12309-1:2023
Bitumen and bituminous binders – Determination of kinematic viscosity; German version EN 12595:2023
Bitumen and bituminous binders – Determination of dynamic viscosity by vacuum capillary; German version EN 12596:2023
Cranes – General design – Part 3-6: Limit states and proof of competence of machinery – Hydraulic cylinders; German version EN 13001-3-6:2018+A1:2021
Wood-flooring and parquet – Multi-layer parquet elements; German version EN 13489:2023
LPG equipment and accessories – Inspection and testing of LPG road tankers; German version EN 14334:2023
Laboratory measurement of airborne and structure-borne sound from service equipment – Part 1: Application rules for waste water installations; German version EN 14366-1:2023
Tanks for the transport of dangerous goods – Tank equipment for the transport of liquid chemicals and liquefied gases – Product discharge and air inlet valves; German version EN 14432:2023
Tanks for the transport of dangerous goods – Tank equipment for the transport of liquid chemicals and liquefied gases – Foot valves; German version EN 14433:2023
Fire safety storage cabinets – Part 1: Safety storage cabinets for flammable liquids; German version EN 14470-1:2023
Bitumen and bituminous binders – Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV); German version EN 14769:2023
Bitumen and bituminous binders – Determination of complex shear modulus and phase angle – Dynamic Shear Rheometer (DSR); German version EN 14770:2023
Fixed firefighting systems – Water mist systems – Part 7: Test protocol for commercial low hazard occupancies for automatic nozzle systems; German version EN 14972-7:2023
Railway applications – Welding of railway vehicles and components – Part 1: General; German version EN 15085-1:2023
Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling – Terms, definitions, test conditions, test methods and requirements; German version EN 15218:2022
Air quality – Assessment of air quality monitoring equipment – Part 1: General principles of certification; German version EN 15267-1:2023
Air quality – Assessment of air quality monitoring equipment – Part 2: Initial assessment of the manufacturer’s quality management system and post certification surveillance for the manufacturing process; German version EN 15267-2:2023
Textiles and textile products – Determination of biocide additives – Part 2: Chlorophenol-based preservatives, method using gas chromatography; German version EN 17134-2:2023
Building information modelling – Information structure based on EN ISO 16739-1 to exchange data templates and data sheets for construction objects – Part 2: Configurable construction objects and requirements; English version EN 17549-2:2023
Building valves – Frost resistant taps for outdoor use (FRT) – General technical specification; German version EN 17821:2023
Glass packaging – Finishes for sparkling wines produced by the traditional method (26 mm, 29 mm, 36 mm); German version EN 17827:2023
Glass packaging – 28 millimetre-screw finishes (MCA range) – Dimensions; German version EN 17829:2023
Foodstuffs – Determination of elements and their chemical species – Determination of Ag, As, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Se, Tl, U and Zn in foodstuffs by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion; German version EN 17851:2023
Resilient, textile, laminate and modular mechanical locked floor coverings – Circular Economy – Terms and definitions; German version EN 17861:2023
Energy management system application program interface (EMS-API) – Part 301: Common information model (CIM) base (IEC 61970-301:2020); English version EN IEC 61970-301:2020
Plastics – Determination of Izod impact strength (ISO 180:2023); German version EN ISO 180:2023
Extenders – Specifications and methods of test – Part 2: Baryte (natural barium sulfate) (ISO 3262-2:2023); German version EN ISO 3262-2:2023
Extenders – Specifications and methods of test – Part 3: Blanc fixe (ISO 3262-3:2023); German version EN ISO 3262-3:2023
Extenders – Specifications and methods of test – Part 4: Whiting (ISO 3262-4:2023); German version EN ISO 3262-4:2023
Extenders – Specifications and methods of test – Part 5: Natural crystalline calcium carbonate (ISO 3262-5:2023); German version EN ISO 3262-5:2023
Extenders – Specifications and methods of test – Part 8: Natural clay (ISO 3262-8:2023); German version EN ISO 3262-8:2023
Extenders – Specifications and methods of test – Part 12: Muscovite-type mica (ISO 3262-12:2023); German version EN ISO 3262-12:2023
Extenders – Specifications and methods of test – Part 13: Natural quartz (ground) (ISO 3262-13:2023); German version EN ISO 3262-13:2023
Extenders – Specifications and methods of test – Part 15: Vitreous silica (ISO 3262-15:2023); German version EN ISO 3262-15:2023
Extenders – Specifications and methods of test – Part 16: Aluminium hydroxides (ISO 3262-16:2023); German version EN ISO 3262-16:2023
Extenders – Specifications and methods of test – Part 21: Silica sand (unground natural quartz) (ISO 3262-21:2023); German version EN ISO 3262-21:2023
Extenders – Specifications and methods of test – Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023); German version EN ISO 3262-22:2023
Metallic powders – Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:2023); German version EN ISO 3995:2023
Paints and varnishes – Pull-off test for adhesion (ISO 4624:2023); German version EN ISO 4624:2023
Sensory analysis – Selection and training of sensory assessors (ISO 8586:2023); German version EN ISO 8586:2023
Nonwovens – Test methods – Part 1: Determination of mass per unit area (ISO 9073-1:2023); German version EN ISO 9073-1:2023
Nonwovens – Test methods – Part 3: Determination of tensile strength and elongation at break using the strip method (ISO 9073-3:2023); German version EN ISO 9073-3:2023
Nonwovens – Test methods – Part 14: Coverstock wetback (simulated urine) (ISO 9073-14:2023); German version EN ISO 9073-14:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage – Thermoplastics shafts or risers for inspection chambers and manholes – Determination of resistance against surface and traffic loading (ISO 13266:2022); German version EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage – Thermoplastics inspection chamber and manhole bases – Test methods for buckling resistance (ISO 13267:2022); German version EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage – Thermoplastics shafts or risers for inspection chambers and manholes – Determination of ring stiffness (ISO 13268:2022); German version EN ISO 13268:2023
Metallic and other inorganic coatings – Electropolishing as a means of smoothing and passivating stainless steel (ISO 15730:2023); German version EN ISO 15730:2023
Nuclear energy – Determination of Gd₂O₃ content in gadolinium fuel blends and gadolinium fuel pellets by atomic emission spectrometry using an inductively coupled plasma source (ICP-AES) (ISO 16796:2022); English version EN ISO 16796:2023
Health informatics – Terminological resources – Part 1: Characteristics (ISO 17117-1:2018); English version EN ISO 17117-1:2023
Solid biofuels – Determination of moisture content – Part 3: Moisture in general analysis sample (ISO 18134-3:2023); German version EN ISO 18134-3:2023
Leather – Determination of ethoxylated alkylphenols (APEO) – Part 1: Direct method (ISO 18218-1:2023); German version EN ISO 18218-1:2023
Welding consumables – Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys – Classification (ISO 18274:2023); German version EN ISO 18274:2023
Functional pigments and extenders for special applications – Part 4: Nanoscale titanium dioxide for photocatalytic application (ISO 18473-4:2022); German version EN ISO 18473-4:2023
Paints and varnishes – Determination of stone-chip resistance of coatings – Part 2: Single-impact test with a guided impact body (ISO 20567-2:2023); German version EN ISO 20567-2:2023
Refrigerating systems and heat pumps – Valves – Requirements, testing and marking (ISO 21922:2021); German version EN ISO 21922:2021
Dentistry – Test methods for machining accuracy of computer-aided milling machines (ISO 23298:2023); German version EN ISO 23298:2023
Dentistry – Test methods for machining accuracy of computer-aided milling machines (ISO 23298:2023); German version EN ISO 23298:2023
Determination of uranium content in samples coming from the nuclear fuel cycle by L-absorption edge spectrometry (ISO 24459:2021); English version EN ISO 24459:2023
Geometrical product specifications (GPS) – Surface texture: Areal – Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021); German version EN ISO 25178-2:2022
Electronic fee collection – Charging performance framework (ISO 37444:2023); English version CEN ISO/TS 37444:2023
Tool holders with cylindrical shank – Part 1: Cylindrical shank, location bore; Technical delivery conditions (ISO 10889-1:2004)
Rolling bearings – Noise testing of rolling bearing greases – Part 1: Basic principles, testing assembly and test machine (ISO 21250-1:2020)
Rolling bearings – Noise testing of rolling bearing greases – Part 2: Test and evaluation method BQ+ (ISO 21250-2:2020)
Rolling bearings – Noise testing of rolling bearing greases – Part 3: Test and evaluation method MQ (ISO 21250-3:2020)
Rolling bearings – Noise testing of rolling bearing greases – Part 4: Test and evaluation method NQ (ISO 21250-4:2020)
Soil quality – Determination of organochlorine pesticides by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD) (ISO 23646:2022)
Coding system for selected surface coatings according to DIN EN ISO 4042 and DIN EN ISO 10683 for fasteners in the military sector; Text in German and English
Building services in swimming baths – Indoor pools
Emission control – Storage and handling of wood pellets at the point of end use – Requirements under environment, health, and safety aspects
Hygiene in drinking-water supply systems – Requirements for planning, execution, operation, and maintenance
Để biết thêm thông tin về các tiêu chuẩn, Quý doanh nghiệp có thể liên hệ trực tiếp với Trung tâm Thông tin – Truyền thông theo số điện thoại: (024)37564268 hoặc (024)37562608; Fax: (024)38361556;
Email: ismq@tcvn.gov.vn
